15 Minute FE/BR Window
The FDI15M Forced Entry Resisting Window System is capable of resisting 15 minutes of forced entry assault and defeating multiple impacts of 7.62mm NATO and 5.56mm projectiles as defined by applicable U.S. Government Standards.
Features
DOS Codes and Model Numbers
DOS 1123 GWV-15R-FDI-02
Glazing: Glazing Materials shall be of a type approved by H.P. White Laboratory for Forced entry and bullet resistance.
Limitations: The FDI-FW15M Fixed Window Series was primarily developed to compliment the FDI-15M door series in those areas
where forced entry, bullet resistant type glazing was required. This sturdy and boldly designed unit is capable of withstanding repeated
physical assaults and multiple impacts.
Construction
Sizes: All windows are made to order.
Openings: Standard rough opening is required to be 3/8” to ½” larger than window gap cover dimension.
Finish: Standard: All window frames are furnished prime painted
Options: Factory applied enamel can be provided. Also, aluminum trim in Clear and Bronze, Stainless Steel, and Brass are
available for a premium. Contact factory for information.
Applicable Standards
The FDI15M Forced Entry Resisting Window System is capable of resisting 15 minutes of forced entry assault and defeating multiple impacts of 7.62mm NATO and 5.56mm projectiles as defined by applicable U.S. Government Standards.
Features
- Steel construction
- Glazing component easily field replaceable
- Multi-impact and forced entry resistant
- Custom sizes available
- Shipped glazed, ready for installation
DOS Codes and Model Numbers
DOS 1123 GWV-15R-FDI-02
Glazing: Glazing Materials shall be of a type approved by H.P. White Laboratory for Forced entry and bullet resistance.
Limitations: The FDI-FW15M Fixed Window Series was primarily developed to compliment the FDI-15M door series in those areas
where forced entry, bullet resistant type glazing was required. This sturdy and boldly designed unit is capable of withstanding repeated
physical assaults and multiple impacts.
Construction
- Frame assembly is constructed of steel plates, angles and tubes. Framing dimensions are 2 ¼” wide by 5” deep.
- Frames are fabricated and shipped completely glazed ready for installation
- All joint connections are welded to provide a rigid assembly when installed
- The caulk space is protected against ballistic and physical assault
- Frames are pre-drilled to accept ½” anchors on 8” center as required
- Steel sub frame recommended.
Sizes: All windows are made to order.
Openings: Standard rough opening is required to be 3/8” to ½” larger than window gap cover dimension.
Finish: Standard: All window frames are furnished prime painted
Options: Factory applied enamel can be provided. Also, aluminum trim in Clear and Bronze, Stainless Steel, and Brass are
available for a premium. Contact factory for information.
Applicable Standards
- DOS SD.STD-01.01 (Rev. G amended)